Advertisement
3-in-1 TV STAND
Step 3
: Option 2 - Mounting bracket instructions for a TV with an irregularly shaped or
obstructed back
1 Align the TV brackets (Q) with the mounting screw holes on the back of the TV. Make sure the hooks face the
bottom of the TV. Make sure that the brackets are level.
2 Place spacers (UU or VV) behind the TV brackets and flat washers (WW or XX) and lock washers (QQ, RR, SS, or
TT) over the holes in the TV brackets (Q), then insert the bolt (II, KK, MM, or PP) through the washers.
3 Tighten the screws until they are snug against the TV bracket. Do not over tighten.
You'll need:
Bolts & Washers
or
II (4)
KK (4)
or
or
QQ (4)
RR (4)
or
or
MM (4)
or
SS (4)
TT (4)
www.insigniaproducts.com
QQ
or
WW
or
VV
UU
Level
PP (4)
VV (4)
or
WW (4)
XX (4)
or
II
KK
or
MM
or
PP
or
or
or
SS
TT
RR
XX
UU (4)
Q TV brackets (2)
Phillips screwdriver
17
Advertisement
