Saving; Saving Manually - wtw pH 3300i Operating Manual

Operation
32
4.4

Saving

The measuring instrument has an internal data memory. It can store up to
800 data records.
A complete data record consists of:
Storage location
Date/time
Measured value
Temperature
Temperature measuring procedure
ID number
You can transmit measured values (data records) to the data storage in two
ways:
Save manually
Switch on AutoStore (Int 1).

4.4.1 Saving manually

You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free storage
location appears under the current measured value on the display.
ISE U pH
S
6 9 9
1
8 2 4
Time Baud
Day.Month No.
Year Ident
AutoCal DIN Auto
LoBat
AutoCal TEC ConCal
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
mol/L
2
mV/pH
% ppm
mg/L
°F
4
%
TP
°C
TempError
CalError
Store
ARng AR RCL
pH 3300i/3400i
ba75682e02 03/2008