Commissioning; Scope Of Delivery; Initial Commissioning - wtw pH 3300i Operating Manual

pH 3300i/3400i
Setting the date
and time
ba75682e02 03/2008
3

Commissioning

3.1

Scope of delivery

Handheld meter, pH 3300i or 3400i
Plug-in power supply, optional (3400i only)
Operating manual and short operating manual
4 batteries, 1.5 V Mignon type AA (in the instrument)
3.2

Initial commissioning

Perform the following activities:
Set the date and time
Connect the plug-in power supply, optional (3400i only)
1 Press the <M> key and hold it down.
2 Press the <ON/OFF> key.
The display test appears briefly on the display.
3 Press the <RUN/ENTER> key repeatedly until the date appears on
the display.
4 Set the date of the current day with <▲> <▼>.
5 Confirm with <RUN/ENTER>.
The date (month) flashes in the display.
6 Set the current month with <▲> <▼>.
7 Confirm with <RUN/ENTER>.
The year appears on the display.
8 Set the current year with <▲> <▼>.
9 Confirm with <RUN/ENTER>.
The hours flash on the display.
10 Set the current time with <▲> <▼>.
11 Confirm with <RUN/ENTER>.
The minutes flash on the display.
12 Set the current time with <▲> <▼>.
13 Confirm with <RUN/ENTER>.
The instrument switches to the pH measuring mode.
14 Switch the instrument off using <ON/OFF>.
Commissioning
11