Saving; Saving Manually - wtw pH/Oxi 340i Operating Manual

Operation
42
4.6

Saving

The measuring instrument has an internal data memory. It can store up
to 500 data records.
A complete data record consists of:
l Number of the storage location
l Date/time
l Measured values of the probes connected
l Temperature
l Temperature measuring procedure
l ID number
You can transmit measured values (data records) to the data storage
in two ways:
l Save manually
l Switch on AutoStore (Int 1), (see page 44).

4.6.1 Saving manually

You can transmit a measured value to the data storage as follows:
1 Press the <STO> key.
The current number (location number No.) of the next free stor-
age location appears under the current measured value on the
display.
TDS U O
pH
S
1 6 9 9
Baud
Time
8 1 7
Day.Month No.
Year Ident
Tref25 Tref20 AutoCal DIN
LoBat nLF Lin Cal AutoCal TEC
2 Confirm with <RUN/ENTER>.
The display switches to entering the ID number.
Sal
mV/pH
%
mg/l
m S/
cm
mbar M cm
1/ cm Sal
4
°
C
/
% K
TP
° F
Auto Store
ARng
AR RCL
pH/Oxi 340i