Led And Key Function - LAUMAS TLU Installation And User Manual

LED
net weight LED: net weight display (semi-
NET
automatic tare or preset tare)
zero LED (deviation from zero not more than +/-
0
0.25 divisions)
stability LED
kg
unit of measure: kg
g unit of measure: g
L other unit of measure
*) To activate the secondary LED function, during weight display press and hold down MENU and
▲ keys at the same time (press MENU immediately followed by ▲).
KEY
Gross  Net
Setting setpoints and delay
Setting general parameters
(press
+
followed by
Setting preset tare (press
+
immediately followed by
Into menus LEDs light up in sequence to indicate that it is not displaying a weight.

LED AND KEY FUNCTION

Main function
Short press
immediately
)
)
LED lit: input 1 closed
LED lit: input 2 closed
LED lit: output 1 closed
LED lit: output 2 closed
LED lit: output 3 closed
LED lit: output 4 closed
Long press
(3 s)
Tare resetting
Net  Gross
mV load cell test
- 7 -
Secondary function *
Into menus
Cancel or return to previous
menu
Select figure to be modified or
return to previous menu item
Modify selected figure or go
to next menu item
Confirm or enter in submenu