152-388-100-02, Issue 2
Configuring the System
The Config menu
(Figure
•
Standard options
•
ADC options
(Figure 8 on page
•
Date and time (see
•
Master clear (see
•
Reset to factory default configuration
Monitor
Performance
ID: xxxx--xxxx--xxxx--xxxx
Making Changes to Standard and ADC Options
Figure 7
and
Figure 8 on page 16
that are supported by HiGain units when connected to units from other vendors. ADC options are an extended set
of options that are only available when using HiGain units exclusively. For a description of each option and a list
of possible option settings, refer to
1
Type
to select the Config menu.
C
2
Use the
and
3
Use the arrow keys to select an option.
4
Press the
SPACEBAR
5
Press
to activate your choice.
ENTER
H2TU-C-388 List 1
6) allows you to make the following types of system configuration changes:
(Figure 7 on page
16)
16)
"Setting Date and Time" on page
"Clearing the History, Alarm, and Event Log Screens" on page
(Figure 9 on page
Event Log
Config
+----------------------+
|
Standard Options ->
| PairGain Options ->
| Date and Time
| Master Clear
| Set Factory Defaults |
+----------------------+
04/15/00 12:30:01
Figure 6. Configuration Menu
show the Standard and ADC configuration options. Standard options are those
Table 5 on page 17
arrow keys to select Standard Options or ADC Options, and press
to cycle through the available settings for that option.
13)
20)
Inventory
Rlogon
|
|
->
|
|
H2TU-C
and
Table 6 on page
18. To make changes to these options:
June 6, 2000
Provisioning
21)
Help
System: OK
.
ENTER
15