Setting Circuit Id Numbers; Configuring The System - ADC HiGain H2TU-C-388 List 7F Manual

LTPH-UM-1214-02

Setting Circuit ID Numbers

The Inventory screen provides product information on all units in the system and allows setting of the circuit and
unit identification numbers.
I
1 Press to select the Inventory screen.
2 Type the Circuit ID number, then press
3 Type the ID numbers of all other devices listed in the system, pressing

Configuring the System

The Config menu (see
• Standard options (see
•
ADC options (see
H2TU-C-388 List 7F
Figure 5. Inventory Screen
ENTER
Figure 6. Config Menu
Figure 6) allows you to make the following changes:
Figure 7 on page 14).
Figure 8 on page 15).
July 21, 2003
.
ENTER
Provisioning
after each entry.
13