Centrometal Cm Pelet-set Touch 14 Technical Manual page 6

Symbols
SYMBOLS
Room thermostat
Next to the room thermostat
symbol bright blue circle (the
room thermostat has requested
for operating the pump, the pump
does not work if you have not met
all the conditions for its operation,
for example. low temp. in the
boiler, otherwise normally works)
Room corrector symbol show current
measured room temperature (20.0°C), set
room temperature in controller + set room
corrector correction (20.0+5.0°C).
Heating circuit
55°C
Domestic hot water tank
with current temperature
External control – there is a demand
External control – there is no demand
View button / Drop-down menu
(all existing elements of automatic /
remote boiler start are enabled)
Cascade
6 Technical manual - THE DIGITAL BOILER CONTROLLER Cm-Pelet set_Touch 14-90 kW
View button / Drop-down menu
(all existing elements of automatic /
remote boiler start are enabled)
All elements of automatic / remote boiler
start are disabled (ON/OFF button is crossed
in red)
60°C
Hydraulic crossover with the
current temperature
(there are configuration without
temp. sensor)
70°C
Accumulation tank with current
temperature at top of the tank and
at the bottom of the tank.
50°C
Heating (working mode)
Heating + DHW (working mode)
DHW (working mode)
Cm WiFi-box - not connected
Cm WiFi-box - connected