Centrometal Cm Pelet-set Touch 14 Technical Manual page 15

2
3
COPY
BUTTON
3.2. DHW
This option is used to select a one of the three SCHEDULE tables you have set or to select Schedule: OFF
Setting up the table ''SCHEDULE'':
- Factory: OFF
- Table 1, Table 2, Table 3
NOTE:
You can adjust three differnet tables according to your needs, but one table can be active at the moment only. Each table
can be set individualy. You can set 3 starts and 3 stops of an active DHW period in a day.
3.3. RECIRCULATION
This option is used to select a one of the three SCHEDULE tables you have set or to select Schedule: OFF
Setting up the table ''SCHEDULE'':
- Factory: OFF
- Table 1, Table 2, Table 3
NOTE:
You can adjust three differnet tables according to your needs, but one table can be active at the moment only. Each table
can be set individualy. You can set 3 starts and 3 stops of an active DHW recirculation period in a day.
Technical manual - THE DIGITAL BOILER CONTROLLER Cm-Pelet set_Touch 14-90 kW
1
1 - current table you are adjusting (table 1 / table 2 / table 3)
2 - day of the week
3 - green - burner start (on)
red - burner stop (off)
Press the box to adjust the time
You can adjust 3 start and stop during 1 day
You can copy/paste from one day to another by pressing the "day box"
of the day which you want to copy, press the "COPY" button and press
the desired "day box" and press "PASTE" button.
PASTE
BUTTON
Schedule
15