Centrometal Cm Pelet-set Touch 14 Technical Manual page 26

Operation mode
5.7.3. INTERNET SUPERVISION
This option is used to connect regulation to the internet trough Cm Wifi-box via WiFi network. Cm WiFi-box is additional
equipment and is not part of standard delivery.
This option is used to enable/disable Cm WiFi-box and set its parameters.
NOTE: view in this menu depends of enabled additional equipment.
1
Regulation is connected
with web portal
(internet supervision is enabled)
IMPORTANT NOTES
CM WiFi-box requires active DHCP server of Access Point (e.g. router)
because manual setting of network parameters is not possible. For more
informations contact administrator of your local network.
For detailed configuration of the Cm WiFi-box please refer to the Cm WiFi-
box manual received with the Cm WiFi box.
26 Technical manual - THE DIGITAL BOILER CONTROLLER Cm-Pelet set_Touch 14-90 kW
Internet supervision options:
- Factory: "Sup. + control»
- options: "OFF" / "Supervision" / «Sup.+control"
Wifi network name - this option is used to enter the name of the WiFi
WiFi password - this option is used to enter password of the WiFi
1
Time sync. - this option is used to syncronise time betwen web portal
Time zone - this option is used to set the time zone if boiler time zone is
Connection reset - this option is used to reset the connection betwen
1
network you want to connect
network you want to connect
and boiler
different from web portal time zone
Cm WiFi-box and boiler
Regulation is not connected
with web portal
(internet supervision is not enabled)