Centrometal Cm Pelet-set Touch 14 Technical Manual page 16

Schedule
3.4. SCHEDULE – 1st heating circuit
This option is used for adjusting periods when room temperature is maintained. ''Day temperature''/''Night
temperature'' or ''Table'' where switching from ''Day temperature'' to ''Night temperature'' is defined.
Possible adjustment:
- Factory: Day temperature
- Day temperature, Night temperature, Table
NOTE:
It is possible to adjust one table with different settings.
In the table it is possible to set the three switch to "Day temperature" and three switch to "Night temperature" in one day..
3.5. SCHEDULE – 2st heating circuit
This option is used for adjusting periods when room temperature is maintained. ''Day temperature''/''Night
temperature'' or ''Table'' where switching from ''Day temperature'' to ''Night temperature'' is defined.
Possible adjustment:
- Factory: Day temperature
- Day temperature, Night temperature, Table
NOTE:
It is possible to adjust one table with different settings.
In the table it is possible to set the three switch to "Day temperature" and three switch to "Night temperature" in one day.
16 Technical manual - THE DIGITAL BOILER CONTROLLER Cm-Pelet set_Touch 14-90 kW