Unpacking - VWR PCR Workstation Instruction Manual

UNPACKING

Remove the instrument from its packaging and inspect it for signs of damage. If any are
discovered, inform your supplier immediately
The instrument must be placed on a stable, level surface and positioned such that air can
circulate freely around the casing
Ensure your proposed installation site conforms to the environmental conditions for safe
operation
The instrument is designed for indoor use only, temperature range of 10 to 35 °C and humidity
of 35 to 70% are recommended
If the instrument has just been unpacked or has been stored in a cold environment, it should
be allowed to come to room temperature for 2 – 3 hours in the laboratory before switching on.
This will prevent calibration failure because of internal condensation
The instrument must be connected to the power supply with the power cord supplied.
It is recommended that users should thoroughly read this manual prior to use
Contact your supplier if you experience any difficulties with this instrument
VWR Collection PCR Workstation
7. Ventilation cover
8. Screw (31x)
9. Screwdriver (1x)
10. Main cable (1x)
6
(1x)