VWR PCR Workstation Instruction Manual page 19

Select "Functions" and press . To select the
Functions for the auto decontamination, click on
the function buttons on the right panel. A blue light
will flash if a function is selected. To save the
selection press .
Note: During Auto-Decontamination all selected
functions will be activated automatically, after
reaching the selected time only the UV Light will
be deactivated all other functions (Recirculator)
are still running to protect the device from re-
contamination.
Press to go back to the decontamination
routine parameters.
To stop a running Auto Decontamination,
select Abort? Yes and press .
After finalizing an Auto Decontamination run the
final Time will be shown in the display, press
to go back to the main screen.
Note: During Auto-Decontamination all selected
functions will be activated automatically, after
reaching the selected time only the UV Light will
be deactivated. All other selected functions (e.g.
Recirculator) are still active to protect the device
from re-contamination.
18
VWR Collection PCR Workstation