Buttons; Connectors - Axis A82 Series User Manual

AXIS A82 Network Video Door Station Series
Specifications

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 17.

Connectors

HDMI connector
TM
Use the microHDMI
Network connector
RJ45 Ethernet connector with Power over Ethernet Plus (PoE+).
Audio connector
4-pin terminal block for audio input and output.
Function
Line in
GND
Line out
GND
Relay connector
8-pin terminal block for solid state relays that can be used in the following ways:
• As a standard relay that opens and closes auxiliary circuits.
• To control a lock directly.
• To control a lock through a safety relay. Using a safety relay on the secure side of the door prevents hotwiring.
Function
NO/NC
connector to connect a display or public view monitor.
Pin
1
2
3
4
Pin Notes
1
Normally open/normally closed
For connecting relay devices.
The two relay pins are galvanically separated from the
rest of the circuitry.
Notes
Line in (mono)
Audio ground
Line out
Audio ground
21
Specifications
Max current 1 A
Max voltage 30 V DC