AXIS A82 Network Video Door Station Series
Additional settings
3. Under Input for beeper, select I3.
4. In Inputs used for LED control, select 1.
5. Under Input for LED1, select I1.
6. Select what colors to use for each state.
7. Click Save.
8. In the Card types tab, select the card types to allow.
Note
You can keep the default set of card types or modify the list according to your needs.
9. Click Save.
Use DTMF to unlock the door for a visitor
When a visitor makes a call from the door station, the person who answers can use the Dual-Tone Multi-Frequency signaling (DTMF)
of his SIP device to unlock the door. The door controller unlocks and locks the door.
This example explains how to:
•
define the DTMF signal in the door station
•
set up the door station to request the door controller to unlock the door
You make all settings in the door station's webpage.
Before you start
•
Allow SIP calls from the device and set up a SIP account. See
Define the DTMF signal in the door station
1. Go to VoIP > DTMF.
2.
Click the pencil next to the SIP account.
3.
Click Add.
4.
In the Name field, enter "Unlock door".
5.
In the Sequence field, enter "1".
6.
Click Apply and then OK.
Set up the door station to request the door controller to unlock the door
1.
Go to Events > Management > Action rules and click Add.
2.
In the Name field, enter "DTMF unlock door".
3.
From the list of triggers, select Call, DTMF and Unlock door.
4.
From the list of actions, select Axis Door Control.
5. Click New Recipient.
6. Enter the details for the door controller and click OK.
7. Click Retrieve doors and select the door from the list.
11