Jet Ocean Pearls Service Manual page 78

PROGRAM SETUP INFORMATION
Step # 19
Changing the cost per ticket
You must enter the proper cost of credit in order for the audit
page to function properly and provide an accurate payout.
Select "COST PER TICKET" and press "ENTER". This value
should be changed to whatever your individual ticket cost is
per ticket. For example: 0.005 for half of a US Penney or 0.01
for 1 US Penney. After entering the proper value - push the
"ENTER" button to exit the select mode.
NOTE: These settings must be entered properly for the
mathematical equation to provide you a proper payout
percentage. If you select the wrong value, the equation will
display an incorrect value.
Step # 20
Clearing the audit information
To clear the audit information, select "CLEAR DATA" and press
"ENTER". The machine will record the last time this was done.
NOTE: The machine does not give you a confirmation prompt
when clearing the data. If you select "CLEAR DATA" and
press "ENTER", the information will be cleared and cannot
be retrieved.
Step # 21
Clearing the audit information
After clearing the data, you will notice that all values will be
reset to zero. Please note that "Tickets Per Credit" will remain
at the older number until the next game is played, then this
value will be updated.
Jennison Entertainment Technologies Ocean Pearls Service Manual Page 78