Jet Ocean Pearls Service Manual page 17

Step # 2-J
Slowly lift the unit vertical and ensure that the pallet stays on the
ground. Move the pallet out from under the forks and then slowly
lower the unit to the ground. If applicable, DO NOT attempt to drive
the forklift with the unit in this position as it will be unstable.
WE RECOMMEND REMOVING THE CABINET BOX
BEFORE REMOVING THE GAME FROM THE SKID
Step # 2-K
Preparing the unit for assembly & moving the cabinet
After the main cabinet is on the ground - DO NOT PUSH ON THE
FRONT PART OF THE CABINET. The monitor is on the front of the game
and can be damaged if you attempt to push or move the game in this
manner. Only attempt to move the main cabinet by pushing on one
side. Move the main cabinet unit to the location where the game will
ultimaltey be placed in your location.
DO NOT ATTEMPT TO PUSH OR MOVE THE UNIT BY
PUSHING ON THE MONITOR
Step # 2-L
Preparing the unit for assembly & moving the cabinet
As you remove the foam packaging, continue to inspect the main
cabinet for any concealed shipping damage. Contact your distributor
immedietly should you notice any damage.
CONTACT YOUR DISTRIBUTOR IF YOU NOTICE ANY
INTERNAL OR CONCEALED DAMAGE
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
NOTICE
WARNING
NOTICE
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 17