Jet Ocean Pearls Service Manual page 35

Step # 7
Locate middle holding area or bridge. Begin to install at the angle
shown in the photo to the right.
Step # 7-A
Slide the assembly in at a 45 degree angle to the securing bolts on
elevator # 1.
Step # 7-B
Lift up on the right side of the assembly and guide the opening into
the two securing bolts located on elevator # 2.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 35