Jet Ocean Pearls Service Manual page 18

Step # 3
Locate and open the console box. Depending upon the destination,
this box may be made out of plywood or cardboard. For plywood
boxes, remove one side of the box as shown and carefulley remove
the elevator box, spare parts box, and console unit. The unit keys are
in the spare parts box.
Step # 3-A
Carefully remove the console unit from the box or crate and then
remove the foam packaging. Be careful not to pierce the packgaing
too deep with a utility knife or blade as this could damage the
graphics or acrylic.
Step # 3-B
Depending upon your Country, the top of the control center may need
to be installed. If it is in your case, the console unit will look like the
unit in the photo to the right.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 18