Jet Ocean Pearls Service Manual page 24

Step # 3-R
Locate the cabinet mounting brackets (In the spare parts box (OR)
alrerady installed onto the control center) and install the the bolts on
the left side of the control center. Do not tighten all the way until the
other side is lined up properly. When BOTH SIDES are properly
aligned, careful tighten all the bolts.
Step # 3-S
After the control center is attached to the main cabinet - do not try
and move the unit by pushing or pulling on the control center. It is
better to push or pull on the sides of the main cabinet and the the
control center come with the main cabinet.
DO NOT TRY AND MOVE THE ENTIRE UNIT BY
PUSHING OR PULLING ON THE CONTROL CENTER.
ONLY MOVE THE ENTIRE UNIT BY PUSHING ON THE
Step # 4
Locating the control center components box
Locate both Section # 3 and Section # 4 boxes and remove them from
the skid.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
DANGER
MAIN CABINET.
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 24