Jet Ocean Pearls Service Manual page 36

Step # 7-C
After the unit is properly seated on the front and rear securing bolts of
elvator # 2, tighten the bolts with a Phillips head screw driver.
Step # 7-D
After the unit is properly seated on the front and rear securing bolts of
elevator # 1, tighten the bolts with a Phillips head screw driver.
Step # 7-E
Attach the two wires to the mechanical switch as shown. The BLACK
wire should be installed on the LEFT pole and the YELLOW wire should
be installed on the MIDDLE pole.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 36