Jet Ocean Pearls Service Manual page 112

CHANGING MOTORS ON THE EEL OR PELICAN BONUS
Step # 12
Remove the acrylic structure
Depending upon which motor you are
removing, you will need to remove the
acrylic graphic and matel claw (The
Spinning Fish or the Fish Hook).
Step # 13
Unscrew the set-screw
Remove the set-screw that is used to
hold the metal claw to the motor
shaft. After the set screw is removed,
PICTURE NOT AVAILABLE
carefully pull the assembly straight
towards you.
Step # 14
Unplugging & removing the motor assembly
Whether your motor needs to be
replaced or you are replacing the
entire assembly, you must first unplug
the two electrical connections going to
both the motor itself and the sensor.
You must also unscrew the four nuts
that are securing the assembly to the
acrylic backboard. Pull the assembly
straight back
Jennison Entertainment Technologies Ocean Pearls Service Manual Page 112