Jet Ocean Pearls Service Manual page 110

CHANGING MOTORS ON THE EEL OR PELICAN BONUS
Step # 6
Unplugging the lower monitor connections
CAREFULLY remove both connections
for the lower monitor. Take great care
not to bend any pins by pulling the
lower monitor connector # 1off at an
angle. Slowly pull the connector
straight back and GENTLY lay it to the
side. Repeat the same step with the
lower monitor connector # 2.
Step # 7
Remove the acrylic panel above the monitor
Remove the clear acrylic window that
is installed just above the monitor.
This is secured with four screws.
Step # 8
Locate and attach the glass holder
Locate and attach the glass holder.
This is the suction cup device that
attaches directly to the glass. When
installing and pressing down on the
device - DO NOT apply too much
pressure to the monitor glass.
Jennison Entertainment Technologies Ocean Pearls Service Manual Page 110