Jet Ocean Pearls Service Manual page 28

Step # 4-J
Connecting Electrical Connectors
On the upper RIGHT side of the main cabinet (Section # 2), ensure that
the 5 Pin LED connector on the RIGHT side is properly plugged into the
LED board and seated properly. It will be difficult to reach this
connection after the unit is assembled.
Step # 4-K
Connecting Electrical Connectors
On the upper LEFT side of the main cabinet (Section # 2), ensure that
the 5 Pin LED connector on the RIGHT side is properly plugged into the
LED board and seated properly. It will be difficult to reach this
connection after the unit is assembled.
Step # 4-L
Locate the holes in the upper RIGHT portion of the main cabinet
(Section # 2). The bolts on the bottom of Section # 3 will slide into
these holes.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 28