Step # 3-I
Connect the 4 Pin connector.
AS YOU MATE THE CONNECTION, BE SURE THAT NO
PINS GET PUSHED OUT.
Step # 3-J
Connect the second 8 Pin connector to the connector board.
AS YOU MATE THE CONNECTION, BE SURE THAT NO
PINS GET PUSHED OUT.
Step # 3-K
Connect the 5 Pin Molex to the connector board. These wires control
the vertical and horizontal cascading LED lights on the front left and
right of the main cabinet and the lower horizontal LED lights along the
bottom of the control center and main cabinet.
AS YOU MATE THE CONNECTION, BE SURE THAT NO
PINS GET PUSHED OUT.
Jennison Entertainment Technologies
INSTALLATION INSTRUCTIONS
CAUTION
CAUTION
CAUTION
Ocean Pearls Service Manual
Check Box When This Step is Complete
Check Box When This Step is Complete
Check Box When This Step is Complete
Page 21