Installation Diagram - Raven RS1 Installation Manual

Iso guidance and steering for rogator c; terragator c

Hide thumbs Also See for RS1:

11. Press Accept

12. While moving slowly, drive straight to a point on the horizon.

13. Press Accept

. WAS calibration is complete.

14. Press Accept

15. Press Steering Valve Calibration

16. While stationary, press Accept

slightly to the left and to the right.

17. Press Accept

on the Calibration completed successfully prompt.

INSTALLATION DIAGRAM

The image below provides a basic overview of the installation of the RS1. Refer to the next sections for detailed

installation information.

FIGURE 2. RS1 RoGator/TerraGator C Series Installation Diagram

TO MACHINE'S BULKHEAD CONNECTOR

to Start steering valve calibration. The machine will automatically turn

115-4010-002

RoGator/TerraGator C Raven RS1™ ISO Guidance and Steering Installation Guide

ISO Cabling Already Present at V4