Table of Contents
Advertisement
Open-Me-First
3.14 Video Output Monitor Card Line and Sync Select.
The Video Output Monitor Card's line and sync select switch positions are
numbered 1 through 4, left to right. Switches 1 and 2 select the video line
to trigger switches on. Switch 3 selects the sync signal which will be used
to time switch commands. Switch 4 is not used – its position is unim-
portant. Refer to Figure 3-27 for examples of line and sync selection and
see Figure 2-10 for the physical location of the Video Output Monitor
Card's line and sync select switch.
UP = CLOSED
DOWN = OPEN
Figure 3-27 Video Output Monitor Card Line and Sync Selection
Figure 3-28 Video Output Monitor Card Line and Sync Switch Location
07/96
P/N 81905903820
System Configuration
Section 3
page 3.23
Advertisement
Table of Contents
