Monitor Output Connectors; Reference (Sync) Connectors (1 And 2) - PESA Cougar Series Open Me First

Open-Me-First
4.5 Jaguar Audio Frame Connectors Continued:
Control (PRC) Connectors (CONTROLS IN) Continued:
The pinout of the 9-Pin Control Connector is as follows:
PIN NO.
1
2
3
4
5
6
7
8
9
The pinout of 5-Pin Control Connector is as follows:
PIN NO.
1
2
3
4
5
For PRC communications, the user should use a direct pin-for-pin cable for
interfacing between the control connectors and the peripheral equipment.
DO NOT use a "NULL MODEM" cable.

Monitor Output Connectors

The Monitor Output Connectors provide a test signal which will be utilized
to monitor Jaguar Audio Routing Switcher activity when an optional moni-
tor card and output combiner cards are installed in the Jaguar Frame.

Reference (Sync) Connectors (1 and 2)

The sync connectors are used to connect an external sync signal to the
Jaguar Audio Routing Switcher. The sync signal may be either a color
black or composite sync signal. The use of an external sync signal allows
switch changes to be accurately timed in the vertical interval. The sync
connectors are loop-thru connectors and must be terminated with 75
ohms if looping is not used.
page 4.14
System Connections Section 4
DESCRIPTION
GROUND
RX+ DATA
TX- DATA
GROUND
SPARE
GROUND
RX- DATA
TX+ DATA
GROUND
DESCRIPTION
TX+ DATA
TX- DATA
GROUND
RX+ DATA
RX- DATA
P/N 81905903820
07/96