Table of Contents
Advertisement
Open-Me-First
3.1 Introduction Continued:
Table 3-7 Jaguar Audio Output Monitor Card Function Switches
SWITCH FUNCTION
LEVEL CODE
INPUT CODE
OUTPUT CODE
Additionally, the circuitry of each matrix card and output monitor card
contains a switch that controls the card's sync number and sync line
selection that the card will trigger on. The function of the configuration
switches (level code, input code, output code, sync select, and sync line
select switches) is discussed in detail in the following manual sections.
Please note that each matrix card's and output monitor card's sync select
and sync line select configuration switches are described separately
because of differences in functionality.
3.2 Cougar Frame Level Code Selection
The level (strobe) select switch positions are numbered 1 through 8 right
to left. Switch positions 1-6 select level codes 0 through 62. Switch posi-
tions 7 and 8 are not used – their settings are unimportant. Refer to
Figure 3-1 for an example of level code selection and to Figures 3-2 and
3-3 for views of the physical location of the function switches.
page 3.4
System Configuration
JAGUAR AUDIO OUTPUT MONITOR CARD
Figure 3-1 Cougar Frame Level Code Selection
Section 3
SWITCH NUMBER
S3
S2
S1
P/N 81905903820
07/96
Advertisement
Table of Contents
