Table of Contents
Advertisement
Open-Me-First
4.5 Jaguar Audio Frame Connectors Continued:
Fan Connectors
The fan connectors provide DC power to the Jaguar Audio Routing
Switcher's chassis fans.
AC Power Connectors
The AC Power Connector enables the connection of the AC line to the
Jaguar Audio Routing Switcher. The AC line input voltage can be from
100 - 240 VAC and the AC line frequency range can be from 47 - 63 Hz.
System Alarm Connectors
Matrix Card Alarm Connector (MATRIX)
An alarm circuit has been provided in the circuitry of each of the 64X32
Audio Matrix Cards. This circuit acts as a switch to trigger an optional
external alarm in the event of a matrix card CPU fault or failure. The
controller alarm circuit supplies a "contact" closure but does not provide a
voltage to the external alarm. The alarm circuit has 10mA current limit.
The Matrix Card Alarm Connector allows connection of the Matrix Card
Alarm.
Power Supply Alarm Connectors (PWR)
An alarm circuit has been provided in the circuitry of each of the PS130
Power Supplies. This circuit acts as a switch to trigger an optional external
alarm in the event of a failure in the power supply or of the AC line source.
The alarm circuit supplies a contact closure but does not provide a voltage
to the external alarm and has a 10mA current limit. The Power Supply
Alarm Connectors allow connection of the Power Supply Alarms.
Control (PRC) Connectors (CONTROLS IN)
The 9-Pin Control Connector provides for the connection of an optional
external controller to the Jaguar Audio Routing Switcher. The 5-Pin Control
Connector provides for the connection of additional Jaguar Audio Routing
Switchers to form a larger switching matrix. Both of the control connectors
allow for the bi-directional transmission of data.
07/96
P/N 81905903820
System Connections
Section 4
page 4.13
Advertisement
Table of Contents
