Level Code (Strobe) Selection; Figure 2-2 Cables Attached To Supports; Figure 2-3 Level Code Selection - PESA Cougar Manual

Digital Video
2.6 Cabling Continued:

2.7 Level Code (Strobe) Selection

2
INSTALLATION
page 2.4
Installation

Figure 2-2 Cables Attached to Supports

The level (strobe) select switch, S3, (a binary coded switch) is located on
the inside of the Cougar Digital Video Routing Switcher on lower left-hand
side of the backplane. Switch numbers are 1 through 8 right to left.
Switches 1-6 select level codes 0 through 62. Switches 7 and 8 are not
used – their position is unimportant. Refer to Figure 2-3 for an example
of level code selection and see Figure 2-4 for the physical location of the
level code switch.

Figure 2-3 Level Code Selection

Section 2
10/95
P/N 81905903440