GLP impression FRIO BAR User Manual page 29

German Light Products®
DMX Mode 2: Multi-Layer provides 16-bit
control of tilt and dimming, shutter
effects, a Control/Settings channel that
lets you configure the fixture remotely via
DMX, color temperature control, a virtual
color wheel (color presets) and RGBW
color mixing.
It also features a powerful effects engine
with static and dynamic pixel and zoom
effect patterns.
Besides the base layer (Layer 1)
described above, DMX Mode 2 features
two additional layers that can be
superimposed onto the base layer:
Layer 2, the middle layer, appears
•
over the base layer.
Layer 3, the top layer, appears over
•
the base layer and over Layer 2.
Each of these two additional layers offers
a 16-bit layer master (the visibility of the
layer over the lower layers from 0% –
100%), shutter effects, RGBW control and
the same range of pixel FX as in DMX
Mode 1.
impression FR10 Bar User Manual Rev. A
Mode 2
Multi-Layer
1
Tilt
2
3
Intensity global
4
5 Shutter global
6 Control/Settings
7 CTC
8 Virtual color wheel
9 Red
10 Green
11 Blue
12 White
13 Pixel FX Pattern select
14 Pixel FX Position/Speed
15 Pixel FX Crossfading
16 Pixel FX Transition
17 Pixel FX Length
18 Pixel FX Offset
19 Zoom global
20 Zoom FX Pattern select
21 Zoom FX Position/Speed
22 Zoom FX Crossfading
23 Zoom FX Transition
24 Zoom FX Length
25 Zoom FX Offset
26
Layer 2 (middle layer) Master
27
28 Shutter
29 Red intensity
30 Green intensity
31 Blue intensity
32 White intensity
33 Pixel FX Pattern select
34 Pixel FX Position/Speed
35 Pixel FX Crossfading
36 Pixel FX Transition
37 Pixel FX Length
38 Pixel FX Offset
39
Layer 3 (top layer) Master
40
41 Shutter
42 Red intensity
43 Green intensity
44 Blue intensity
45 White intensity
46 Pixel FX Pattern select
47 Pixel FX Position/Speed
48 Pixel FX Crossfading
49 Pixel FX Transition
50 Pixel FX Length
51 Pixel FX Offset
29