Advertisement
Step 16
Insert a SLIDE CAM (RR) into each DRAWER
å
SIDE (D28 and D29).
Fasten the LONG RIGHT DRAWER SLIDE (V) to the
å
RIGHT DRAWER SIDE (D28) and the LONG LEFT
DRAWER SLIDE (W) to the LEFT DRAWER SIDE (D29).
Use four GOLD 5/16" FLAT HEAD SCREWS (CCC)
through holes #1 and #3.
NOTE: The screw head in the CAM must be visible
å
through the slotted hole in the SLIDE.
2
3
www.sauder.com/services
Roller end
1
W
RR
D29
D28
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
RR
V
2
3
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
Roller end
1
CCC
Advertisement
