Related Manuals for Teknik 5424933
Summary of Contents for Teknik 5424933
- Page 1 Teknik The original desktop. Industrial Style High Rise Desk Model 5424933 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
- Page 2 Table of Contents Assembly Tools Required Part Identifi cation No. 2 Phillips Screwdriver Tip Shown Actual Size Hardware Identifi cation Assembly Steps 5-12 Français 13-14 Skip the power trip. This time. Español 15-16 Safety 17-18 Warranty Page 2...
- Page 3 Now you know Part Identifi cation our ABCs. å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identifi cation to help identify similar parts. HUTCH BACK (1) HUTCH END (2) HUTCH SHELF (1)
-
Page 4: Table Of Contents
Hardware Identifi cation å Screws are shown actual size. You may receive extra hardware with your unit. THUMB SCREW - 9 L-WRENCH - 1 WOOD DOWEL -2 BLACK 1-3/4" FLAT HEAD SCREW - 3 BLACK 1-7/8" HEX HEAD SCREW - 4 BLACK 1-3/8"... - Page 5 Step 1 Assemble your unit on a carpeted fl oor or on the empty å carton to avoid scratching your unit or the fl oor. Some assembly Slide the TOP BRACES (J) onto the posts on the å (and snacks) required. RIGHT END (H).
-
Page 6: Thumb Screw
Step 2 Fasten the TOP (C) to the TOP BRACES (J). Turn four å THUMB SCREWS (1) through the TOP BRACES and into the holes in the TOP. Unfold the LEFT END (G) and fasten it to the TOP (C). å... -
Page 7: Wrench
Step 3 Fasten the LEFT END (G) to the TOP (C). Turn two BLACK å 1-7/8" FLAT HEAD SCREWS (4) with the L-WRENCH (2). BLACK 1-7/8" HEX HEAD SCREW (2 used in this step) Page 7... - Page 8 Step 4 Slide the SHELVES (D and E) through the opening in the å LEFT END (G) as shown. Now might be a good time to refresh Fasten the SHELVES (D and E) to the cross bars on the å your drink.
-
Page 9: Black 1-3/4" Flat Head Screw
Step 5 Insert two WOOD DOWELS (3) into the holes in the edge å of the HUTCH BACK (A). Fasten the HUTCH BACK (A) to the HUTCH SHELF (B). å Use three BLACK 1-3/4" FLAT HEAD SCREWS (5). Part (B). Another sturdier, easier, friendlier component! BLACK 1-3/4"... - Page 10 Step 6 Fasten the HUTCH ENDS (F) to the HUTCH BACK (A). å Turn two BLACK 1-7/8" FLAT HEAD SCREWS (4) with the L-WRENCH (2). BLACK 1-7/8" HEX HEAD SCREW This hole must be here. (2 used in this step) This hole must be here.
-
Page 11: Black 1-3/8" Hex Head Screw
Step 7 Carefully stand your unit upright. å Pro Tip: Lift with your Fasten the HUTCH SHELF (B) to the ENDS (H and G). å legs. And, you know, Turn two BLACK 1-3/8" HEX HEAD SCREWS (6) with your arms. the L-WRENCH (2). - Page 12 WARNING Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart. Look out for: What can happen: How to avoid the problem: • Overloaded shelves or drawers. •...