ScrapBox WorkBox 3.0 Assembly Manual page 9

LEFT BOX
Next, you will use several shelves as spacers to properly
12
Slide divider in and align with
pilot holes on lid and base.
Add shelves as shown.
x4
1 1/2"
13
Screws
Once divider and shelves are in place
make sure they fit tightly.
Use a Phillips screw driver to MANUALLY insert
(4) 1 1/2" screws into pilot holes to secure divider.
**Divider MUST be screwed in MANUALLY in order to avoid damaging your WorkBox.**
align and install the Left Box Divider.
Take a moment to locate these shelves:
x6
3 x 13"
Notions
Shelf
x2
13 x 13"
shelves
9