ScrapBox WorkBox 3.0 Assembly Manual page 26

CENTER BOX
23
x4
Locking
Cams
Install (4) Cams into Cam holes
on Bottom Side of Base.
Tighten with Allen Wrench until secure.
26
21
Side 2
Shelf 3
Shelf 2
Shelf 1
Stand Side 2 on its edge with back
groove at the bottom and be sure posts,
dowels & pins are aligned. Use Mallet to tap
Side 2 CAREFULLY into built sections.
22
x6
Locking
Cams
Install (2) more Cams into Cam holes on
front sides of Shelves 2 & 3 (Side 2).
Tighten with Allen Wrench until secure.
Repeat with (4) more Cams in remaining
Cam holes in Shelf 1 and Center Box Lid.