ScrapBox WorkBox 3.0 Assembly Manual page 27

CENTER BOX
Next, with TWO PEOPLE , carefully turn WorkBox onto Side 1 holding onto Base & Lid.
**To avoid injury or damage to your WorkBox, please do not attempt this step alone.**
Side 2
Side 1
Side 2
24
Install remaining (4) Cams
into cam holes on bottom
sides of Shelves 2 & 3.
Tighten using Allen Wrench
until secure.
Back
Groove
25
Carefully slide Back Panels into
back grooves. Be sure that holes
are aligned with corresponding
pilot holes.
x4
Locking
Cams
27