ScrapBox WorkBox 3.0 Assembly Manual page 15

RIGHT BOX
Next, as in the Left Box, you will use shelves as spacers to properly
align and install the Right Box Divider.
Take a moment to locate these shelves:
x2
13 x 13"
shelves
12
Slide divider in and align with
pilot holes on lid and base.
Add shelves as shown
x4
13 1 1/2"
Screws
Once divider and shelves are in place
make sure they fit tightly.
Use a Phillips screw driver to
MANUALLY insert (4) 1 1/2" screws
into pilot holes to secure divider.
**Divider MUST be screwed in MANUALLY in order to avoid damaging your WorkBox.**
x6
3 x 13"
Notions
Shelf
15