ScrapBox WorkBox 3.0 Assembly Manual page 18

CENTER BOX
4
Insert (2) Posts into post holes on
top side of Center Box Shelf 1.
Finished Edge
Center Box
Shelf 1
Top Side
18
x2
Posts
Center Box
Base
Center Box
Divider 1
Next, assemble the upper section of the center box.
You will come back to the lower section later.
Center Box
Shelf 1
Bottom Side
5
x2
Locking
Cams
Fit Shelf 1 into post holes on Divider 1
with finished edge facing up.
Next, Insert (2) Cams at top of Divider 1.
Tighten with Allen Wrench until secure.