Fault
Motor not running.
Motor is running out of round.
Speed fluctuates.
Motor only turning in one
direction.
Gear changeover is not working.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
8. Troubleshooting
Cause
Motor is defective.
Switch is defective.
Battery plug contacts have come loose.
Bearing / gearbox is defective.
Plug on motor has come loose or is not secure.
Leaf springs not sitting in guide sleeve.
Clutch ring inserted incorrectly.
The small circlip is not correctly seated on the
drill shaft.
Ball has jammed in a hole in the drive (burrs).
C-SC_CSSM
2012.08
Remedy
Check electrics with test board.
Check electrics with test board.
Check components.
Check components.
Check components.
Check components.
Check components.
Check components.
Remove burrs.
66/69
Version 1