Fein ABOP 6 Repair Instructions page 61

1. Insert motor in to lower section of housing with air guide ring.
2. Insert black motor cable at bottom.
3. Insert switch in to lower section of housing.
Place thin cables on top of black cable. The red cable is at the top.
NOTE
The thin cables must be under a thick cable so they are not squashed by the
upper section of housing.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
7. Assembly
C-SC_CSSM 2012.08
Tool:
-Small slotted screwdriver
-Cable hooks
61/69 Version 1