ABOP 13-2
1. Insert plastic bolt as shown.
2. Insert right-hand metal bolt half way in to right-hand hole.
3. Insert both leaf springs in right-hand metal bolt and in groove of guide sleeve (of drive).
4. Turn plastic bolt to the right and insert leaf spring in groove of plastic bolt.
5. Insert left-hand metal bolt in hole along with leaf spring.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
7. Assembly
C-SC_CSSM
2012.08
57/69
Version 1