ABOP 13-2
1. Press bearing on to shaft.
2. Fit circlip.
NOTE
Use a new circlip for assembly.
3. Slide plastic washer on to shaft.
NOTE
The flat side of the plastic washer must be on the side of the bearing.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
7. Assembly
C-SC_CSSM
2012.08
Tool:
-Arbor press
-Sleeve: Inner diameter 12 mm
49/69
Version 1
Outer diameter 15 mm