ABOP 13-2
1. Insert spring washer.
2. Insert gear-wheel (with drive).
Turn drive's gear-wheel until cams of gear-wheel sit in recesses in the clutch ring.
The gear-wheel must slide down a little.
3. Insert both shafts together.
4. Fit both washers.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
7. Assembly
C-SC_CSSM
2012.08
55/69
Version 1