Table of Contents
Advertisement
WARNING
Incorrect assembly will damage device.
Motor shaft must be supported when pressing (e.g. using an arbor).
1. Slide sealing ring on to motor shaft.
2. Carefully press sealing ring on to motor.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
7. Assembly
C-SC_CSSM
2012.08
Tool:
-Arbor press
-Arbor
-Sleeve: Inner diameter 7 mm
34/69
Version 1
Outer diameter 30 mm
Advertisement
Table of Contents
