Fein ABOP 6 Repair Instructions page 12

1. Remove plug on motor.
2. Pull shrink-fit hose slightly to the right and press out individual cables over fixing mechanism on
air guide ring.
3. Press motor cable out of plug with unlocking tool.
NOTE
The locking noses in the plug are worn during disassembly.
Use new plugs for assembly.
4. Take motor and air guide ring out of housing.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
6. Disassembly
C-SC_CSSM 2012.08
Tool:
-Unlocking tool
12/69 Version 1