ABOP 6
1. Slide spring washer on to shaft.
2. Insert spur gear.
3. Fit circlip.
NOTE
Use a new circlip for assembly.
4. Press bearing as far as stop on shaft.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
ABOP 6, 10, 13-2
7. Assembly
C-SC_CSSM
2012.08
Tool:
-Arbor press
-Sleeve: Inner diameter 6 mm
38/69
Version 1
Outer diameter 20 mm