JLG G10-55A Operation & Safety Manual page 130

Section 7 - Lubrication and Maintenance
If Equipped for LS
A. Air Filter Restriction Indicator Check
1. Perform "Shut-Down Procedure" on page 4-4.
2. Locate air cleaner (1) and check restriction indicator (2). If red band is visible,
filter(s) must be replaced.
3. Remove dust from vacuator valve (3) by squeezing bottom of valve to allow
loose particles to fall out.
Note: Only remove canister cover to service the elements as restriction indicator
indicates. Excessive access to check an element can lead to premature element
failure.
7-16
1
4
5
3
10
OW0970
OW1010
6
OY3010
31200745
2