Bucket - JLG G10-55A Operation & Safety Manual

Bucket

OZ0730
OY2940
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt switch (2) controls bucket tilt.
• Press left side of switch to tilt up.
• Press right side of switch to tilt down.
Installation Procedure:
• Refer to "Attachment Installation" on page 5-9.
Operation:
• Raise or lower boom to appropriate height for loading material from stockpile.
• Align telehandler with face of stockpile and drive slowly and smoothly into pile to
load bucket.
• Tilt bucket up far enough to retain load and back away from pile.
• Travel in accordance with requirements set forth in Section 1 - General Safety
Practices.
• Tilt bucket down to dump load.
31200745
Use Appropriate Bucket Capacity Chart
To determine
Attachment/Fork Capacity" on page 5-4.
Section 5 - Attachments
maximum capacity,
1
refer to "Telehandler/
2
5-35