Section 7 - Lubrication and Maintenance
Engine Oil
A. Engine Oil Level Check
1. Perform "Shut-Down Procedure" on page 4-4.
2. Open the engine cover.
3. Remove dipstick (1) and check oil mark. The oil should be between the full (2)
and add (3) marks within the crosshatched area of the dipstick.
4. If oil is low, remove oil fill cap (4) and add oil to bring oil up to the full mark in the
crosshatch area.
5. Replace oil fill cap and dipstick.
6. Close and secure the engine cover.
7-18
2
3
10
1
OW0970
OW1020
4
OY3070
31200745